Small bronze flared muzzle cannon of this type where made for shooting flaming arrows at ships. For launching fireworks at festivals and for signaling purposes. The example of cast bronze with a bore that is described as at the breach and the bore is reduced to a half round section to form a chamber for the powder mount for use.
The gun would be imbedded into a wooded block such as the lower half of the barrel and the entire breach end is covered...

The tatami armor was used by foot soldiers, archers, and spearmen. Its a lightweight armor which allowed the warriors to be more swift and fluid with their movements. It is also an economical munition armor as a alternative to the traditional lace scale construction. Going to battle was costly and this gave the clan army full protection from all levels of warfare.
The armors head gear covering has two flaps with a back slit...

A signed, matched, pair of Abumi with a geometric design of interwoven maple leafs. The design has been hand chiselled and inlaid with silver and bronze. The stirrups measure 11" long x 5 1/4" wide x 10 1/4" high, and date to the late Edo period. The maker has inlaid his Name and City on both stirrups and this translate as follows: "Made by Yamada Nagamoto living in Kanazawa". Nagamoto is the seventh generation Yamada chiseller to work at Kanazawa, and he was born in 1810...

Antique Japanese pair of abumi (samurai stirrups for horse riding). Made of iron and lacquered black with red lacquer foot. Each abumi is decorated with designs of kiri blossoms in gold lacquer. The buckle of each stirrup has an intricate pierced design and mon in gold lacquer. (Mounted on matching stands made of metal with wooden bases.)

Edo Period (early 1800's)

Dimensions: 16 3/4" high (10 3/4" high without stand) x 12" long x 5 1/2" wide.

Circular jingasa with a gradual domed top; Textured to simulate leather. The composition is of bamboo, paper, and many layers of Urishi lacquer work. The interior is finished in red with its original cotton gear straps and cushion. Excellent condition. With the mitsudome "God of War" mon...

Antique Japanese meadate in the form of a hornet, hand forged iron with gilt brass plate. Mounted on a stand.

Edo Period (1603-1868)

Dimensions: Total including stand 7" high (meadate only 4 1/2" high)

18th century Japanese sword iron tsuba with pierced decoration of a tiger frolicking by a thick stem of bamboo with leaves, 2 sides presenting back and front views. Delightful design, good work, wonderful face of the creature, gilded highlights, very pleasant feel of age. Height 2 15/16 inches.

Late 18th to early 19th century Japanese sword iron tsuba decorated on the front with 3 scholars and an attendant under a pine tree viewing the moon partially obscured by the clouds. There is yet another scholar on the back of the tsuba looking towards the moon as well. Excellent piece with gilding, multimetal (gold, silver and shakudo) inlays and precise detailing - see the incised textile patterns on the golden robe of the scholar on the back. Some wear, overall in excellent condition...

Late 18th to early 19th century iron Japanese sword tsuba with design a Japanese court hat with cords (appears to be a variation of kanmuri hat) next to multimetal inlays of a water lily and maple branches with leaves, and a riding crop with tassels on the back. Wonderful quality detailed work - see leaf veining and crop textures. Beautiful patina on the plate, very nice feel of age. Height 2 3/8 inches.

Late 18th to early 19th century iron Japanese sword tsuba with multimetal inlays depicting sennin Bukan Zenshi standing under a rock and waving for his faithful tiger to approach, which the beast seems to be very happy to do, the back showing mountains with pines and a waterfall. Bukan Zenshi (Pu Hsien in Chinese) was a 7th century priest and is usually shown with a tiger as his attendant...

19th century shakudo Japanese sword tsuba with inlaid decoration of autumn grasses on both sides, all on finely textured ground. Shakudo (an alloy typically consisting of 96% copper and 4% gold) body, superb design perfectly capturing the mood of autumnal melancholy. Crisp work, black shakudo stems and gold seedheads, in excellent condition. Height 2 3/4 inches.

19th century shakudo Japanese sword tsuba for tanto with raised and inlaid decoration of a dragon flying along its rim among wispy clouds, all on finely textured ground called nanako, which means “fish-eggs” as it resembles fine rows of caviar. Shakudo (an alloy typically consisting of 96% copper and 4% gold) body, superb clever design, extraordinary crisp work, in excellent condition. Height 2 3/16 inches.

Late 18th to early 19th century iron Japanese sword tsuba depicting a scholar peacefully fishing by a stream under a rock with vines and pine growing on it, design continues on the back showing clumps of bamboo grass. Nicely designed quiet piece with perfectly captured mood, wonderful quality work with silver and gold inlays, in great condition. Height 3 5/16 inches.

18th century Japanese sword iron tsuba with raised and inlaid decoration of a seated tiger scratching its ear by a thick stem of bamboo with leaves. Delightful design, good work, wonderful depiction of the creature, gilded and silvered leaves, very pleasant feel of age. Height 2 15/16 inches.

19th century Japanese kozuka (sword knife) handle with raised and incised decoration of a morning glory plant with flowers and leaves. Elegant design, excellent crisp work, wonderful warm brown patina, beautiful gilding, in very good condition. Length 3 3/4 inches.

Early 19th century Japanese sword knife (kozuka) handle made of sentoku (alloy consisting of copper, zinc and tin) with inlaid scene of two birds on the riverbank by rocks, grasses and a woven rattan container with stones - such bundles were used for shoring riverbanks during floods. Excellent quality mixed metals inlays, wonderful crisp work. Some indents to the narrow sides from usage, otherwise in very good condition. Length 3 13/16 inches.

19th century Japanese kozuka (sword knife) handle with multimetal inlays depicting a kingfisher sitting on reeds as it watches a stream beneath it for fish. Kozuka body is made of sentoku (alloy consisting of copper, zinc and tin), bronze, copper and shakudo inlays, gilding and silvering. Wonderful elegant design in Japanese taste, excellent detailing. Overall in very good condition. Length 3 7/8 inches.

19th century Japanese kozuka (sword knife) handle with multimetal inlays depicting two silver fern fronds and a length of shimenawa - a rice straw rope used for ritual purification in the Shinto religion. Decoration most probably refers to a particular festival. Superb crisp work - see the fine textures of both leaves and rope, silver and bronze inlays, gilding, finely textured ground called nanako, which means “fish-eggs” as it resembles fine rows of caviar, in great condition...

19th century Japanese kozuka (sword knife) handle with multimetal inlays depicting a Shinto ritual ladle containing various flowers, its bamboo handle decorated with a tied ribbon. Superb crisp work - see the fine textures of different flowers and nodules of the handle, silver and bronze inlays, gilding, finely textured ground called nanako, which means “fish-eggs” as it resembles fine rows of caviar, in great condition. Length 3 9/16 inches.

19th century Japanese kozuka (sword knife) handle depicting a a centipede wrapped around an arrow. Unusual and elegant piece, extraordinary crisp work - see the head and body segments of the creature and fine feathers of the arrow. Gilding, finely textured ground called nanako, which means “fish-eggs” as it resembles fine rows of caviar, in great condition. Length 3 3/4 inches.

Antique Japanese group of 6 tsuba (samurai sword hand guards), made of iron. Each tsuba is unique. From top left to right: suksahi tsube with aoi leaves and tiny inlaid gold details, sukashi tsuba with boat with sail in the mist and signed Masayoshi, sukashi tsuba with three gourds aubergine motif, sukashi tsube with boat and sail, sukashi tsuba with pine branch and mist, wangata tsube with two characters...

19th century Edo period Japanese bronze kashira (metal pommel at the end of the hilt of a sword) with multimetal inlays depicting wispy clouds supporting a tiger, a shishi and a kirin, all on a punched ground texture called nanako, which means “fish-eggs” as it resembles fine rows of caviar. Unusual combination of animals, wonderfully made piece with crisp metalwork and gilding, in great condition. Length 1 1/4 inches.

Early 19th century Japanese sword tsuba with combination of sunken and raised relief decoration of a seated man wearing eboshi (a specific hat worn by aristocrats to indicate rank) holding a bitter melon in his hands and looking at more melons and lotus leaves with flowers, design continuing on the back. Material appears to be shakudo (alloy of copper and gold) with characteristic black patination resembling lacquer...

Late 18th to early 19th century tanto iron Japanese sword tsuba with four cutouts surrounded by gold inlaid scrolls. Great design, nice feel of age, some rusting, overall in good condition. Height 2 1/2 inches.

18th century Japanese sword iron tsuba inlaid on the front with gilded copper bunch of flowers and grasses, the back inlaid with a sickle. Elegant piece in Japanese taste, superb quality inlay with finely defined petals, great feel of age. Height 3 1/4 inches.

18th to early 19th century iron Japanese sword tsuba depicting a bird in flight among bamboo stems and leaves with design continuing on the back. Wonderful subject, crisp work with gilding, excellent detailing. Beautiful patina, great feel of age. Height 2 3/4 inches.

18th to early 19th century iron Japanese sword tsuba with multimetal inlays depicting a tengu in flight among swirling clouds above city roofs as he carries a stolen jar of oil or sake that he carries in a string, two inlaid inscribed silver plaques. Design continues on the back showing a tall tower and more roofs. Tengu are mythological creatures half men, half birds, usually depicted as goblins, and first-class fighters...

18th century or earlier Soten school Japanese sword iron sukashi tsuba with pierced decoration of four samurai with swords and bows among pine trees by a waterfall. Wonderful early work, great design, powerful piece. Signed, the left side of the inscription reads SOTEN, the right one must be the name of a particular artist. Height 2 3/4 inches.

A very unusual and rare mid Edo period iron Duo. Full wrap around breast and back plate with hinged shoulders plates. Detail of an incredibly fierce and deleted dragon wrapped around and suspended around swirling clouds.
In japan, the dragon represent wisdom, strength, force for good, wind, water and of coarse wealth. Dragons are destructive forces, but they are also considered guardians.
The collar of the undergarment is hand sewn silk embroidered with gold threads.
In...

19th century Edo period Japanese kashira (metal pommel at the end of the hilt of a sword) with relief depiction of a crane in flight over pine saplings, all on a finely punched ground texture called nanako, which means “fish-eggs” as it resembles fine rows of caviar. Wonderful crisp metalwork, some worn gilding, in great condition. Length 1 1/4 inches.

19th century Edo period Japanese kashira (metal pommel at the end of the hilt of a sword) with relief depiction of Benten seated on a throne floating on a cloud and accompanied by 3 attendants. Benten is the only female among the Seven Gods of Good Fortune, that of learning, speech and music. Wonderful crisp metalwork, beautiful gold and silver inlays, in great condition. Length 1 1/4 inches.

19th century or earlier Japanese sword set of fuchi (bordering piece between the sword guard and the handle) and kashira (metal pommel at the end of the hilt of a sword) with relief design of numerous butterflies in different attitudes, all on finely punched ground texture called nanako, which means “fish-eggs” as it resembles fine rows of caviar. Excellent quality work, wear to gilding as can be seen on photos. Kashira length 1 5/16 inches, fuchi length 1 7/16 inches.

19th century Japanese sword set of fuchi (bordering piece between the sword guard and the handle) and kashira (metal pommel at the end of the hilt of a sword) with gold inlaid design of birds in flight over a gnarled flowering cherry tree. Made out of shakudo (alloy of copper and gold) with characteristic black patination resembling lacquer. Excellent quality work, in great condition. Kashira length 1 5/16 inches, fuchi length 1 7/16 inches.

19th century Japanese kozuka (sword knife) handle depicting a view from the height of a castle tower and boats with sails and oars among the waves in a bay. Beautifully designed, wonderful crisp work with shakudo and gold inlays, in excellent condition. Length 3 13/16 inches.

19th century Japanese kozuka (sword knife) handle depicting a long arrow and a segment of samurai’s armor with cord, all on the background of a stone castle wall. Unusual and elegant piece, wonderful crisp work - see the textures of the feathers on the arrow and silk wrappings holding together metal plates constituting the armor. Gilding, finely textured ground, in excellent condition. Length 3 13/16 inches.

19th century Japanese kozuka (sword knife) handle depicting Ebisu - one the Seven Gods of Good Fortune, that of fishing - happily hanging out in a humble boat by reeds in a stream. Wonderful crisp work - see his happy smiling face, texture of his hat and finely done reed leaves, in excellent condition. Signed SHOGETSUSAI HARUYUKI on the back - the artist is a listed 19th century Japanese metalsmith. Formerly in the collection of the Museum of Fine Arts, Boston, collection number in red on the b...