Art Nouveau Figural Door Push Plate Cast Iron

Antiques: Furnishings: Architectural: Hardware Pre 1910: item #769079

Circa 1900 Cast Iron Push Plate, depicting a radiant winged female angel, with cherub at her feet. Measures 11", from end to end. Some rust, apparent to photograph.

Handcarved Wood Furniture Carvings Signed Mid-1800s

Antiques: Furnishings: Architectural: Hardware Pre 1900: item #748754
1821B

Three antique handcarved, wooden, decorative futniture pieces; plus nine modern pieces in various stages of reproduction carving. Size of the two antique left/right pieces are approximately 9.5" x 3.5" x 1.25"; the center antique urn and fruit carving is 6.5" x 5" x 1". The two larger pieces are signed by monogram, intertwined "O.A" or "C.A." or other first initial. All other pieces are unsigned. Woods vary from Mahogany, to Rosewood, to Walnut. All pieces in good condition, with various losses.... Click for details

Wedgewood Door Handles

Antiques: Furnishings: Architectural: Hardware Pre 1800: item #746365
0071

Set of 3 Wedgewood Door Handles circa 1790. Measures approximately 1 3/4" by 2.5"

Early American brass bee hive turned andirons c1830

Antiques: Furnishings: Architectural: Hardware Pre 1900: item #673251
5886

Early American brass bee hive turned andirons c1830. This matching pair of fireplace andirons measures 20 inches high and 18 inches deep. Very good original condition. Just in from a Newport RI estate. Shipping extra. Connecticut residents and buyers picking up in Connecticut add 6% state sales tax. Buyers outside the USA are responsible for any taxes,tariffs or customs that might apply.*** If you wish to see examples of similar items we have sold and/or appraised please go to our affiliate ... Click for details

Early 19hc Hand Forged Iron Sign Holder Fancy

Antiques: Furnishings: Architectural: Hardware Pre 1837 VR: item #669981

Early 19hc fancy handmade wrought iron sign holder--this one has a bracket for a torch or candle--minor rust-no condition problems-was designed to be embedded into masonry--18 inch wall bracket-extends out 48 inches--one of a kind-either French or Italian

Set of 6 CAST GILT BRASS DRAWER PULLS c1890-1900

Antiques: Furnishings: Architectural: Hardware Pre 1910: item #661691
01013

A matching set of six 3 x 3" gilt brass furniture drawer pulls c1890-1900. Each retains its original screw and washer; four are slightly curved and two are flat (probably for a bottom drawer). Each has traces of the original gilding and the loops on each have a red patina while three (two curved, one flat) have traces of red on the backing plates (possibly from a painted piece). They are unsigned, and they are in excellent original condition with no cracks, dents, bends, corrosion, losses, d... Click for details

Curtain Tie Back

Antiques: Furnishings: Architectural: Hardware Pre 1900: item #644158
3071700TB

Sandwich glass - opalescent - circa 1840. Diameter 2". ** WE GUARANTEE THE AUTHENTICITY OF OUR MERCHANDISE AS REPRESENTED. MEMBERS OF: THE ANTIQUES COUNCIL, THE VERMONT ANTIQUES DEALERS ASSOCIATION (VADA), THE CAPE COD ANTIQUE DEALERS ASSOCIATION (CCADA). **

Antique Brass Cabinet Hardware – Hinges, 18th Century

Antiques: Furnishings: Architectural: Hardware Pre 1800: item #596633
D124

Five brass cabinet hardware - hinges Patterns (for shaping hinges).
CONDITION: showing age and usage patina.
MEASUREMENTS:
1. 7 ¾ inches (19,7cm ) x 3 1/8 inches (8 cm)
2.... Click for details

Antique European Iron Baroque Lock, 17th -18th century

Antiques: Furnishings: Architectural: Hardware Pre 1800: item #596628
D68

17th -18th century European Baroque Lock. DETAILS: Beautifully hand hammered and hand chiseled from iron in the baroque style, iron plate is covered by pewter to prevent the corrosion of iron.
CONDITION: showing age and usage patina, missing key.
MEASUREMENTS:Length: 11 inches (28 cm), width 6 7/8 inches (17,5 cm). ... Click for details

Huge Primitive Wrought Antique Door Lock Circa 1700's

Antiques: Furnishings: Architectural: Hardware Pre 1800: item #569356
55

This is a very large and unusual circa 1700's antique door lock that that is very primitively made; most likely hand wrought that would have been for a very large / heavy door. It measures 10 1/2" long; 6 5/8" on one side and 5 7/8" on the other side, 1 1/4" thick lock case and weighs a hefty 5 pounds, 5 ounces. There is no key but you can determine from the photo that it would have been a very large key with an unusual design to fit this lock. The key/handle would have depressed the small tab w... Click for details