Antique Tin Doughnut Cutter Biscuit Cookie Solder Seams

Popular Collectibles: Specialty: Kitchenware: Metals Pre 1920: item #761192
211

A wonderful antique tin doughnut cutter that can also be used as a biscuit or cookie cutter. It is primitively made; soldered seam construction. It is estate fresh and has not been cleaned up. The outer cutting edge has some minor bends / waviness. Measures 3" diameter and 1 1/4" tall (not including the handle).

Antique Tin Skimmer Cream Skimmer Strainer

Popular Collectibles: Specialty: Kitchenware: Metals Pre 1920: item #761189
210

A wonderful antique tin cream skimmer or strainer. These handy strainers were used to remove cream off the top of the milk. It is estate fresh and has not been cleaned up. Measures approximately 6" from handle to edge and 5 7/8" at the widest part. Handle has a hole for hanging. A good early collectible tin kitchen skimmer

Tin Nutmeg Grinder

Popular Collectibles: Specialty: Kitchenware: Metals Pre 1920: item #748840
B1568

A very nice tin antique tin nutmeg grinder with original screw clamp and small wooden mallet for pushing down the nut. It is in excellent condition. It measures 6-1/2 inches in length

Wire iron trivet got heavy use in the laundry kitchen.

Popular Collectibles: Specialty: Kitchenware: Metals Pre 1910: item #737339
LFT 328

This wire sad iron trivet is useful and also silhouttes beautifully if you want to hang it. 9 1/8" from tip to end of handle and 4 1/2" at its widest. Early 20th century.

Enamelware Floral Motif Coffee Pot 19th C

Popular Collectibles: Specialty: Kitchenware: Metals Pre 1920: item #717077
B1732

A fabulous chocolate brown enamelware coffee pot with white enamel interior 19th century. It has on one side hand painted enamel blue and white flora with gilded leaves and three gilded bandings and a gilded sprig on the reverse side. The wooden handle and finial has original black paint. The fittings and lid has original chrome plating. It is in excellent condition with no restoration. It measures 9-1/4 inches in height and measures across approximately 8-1/4 inches from tip of spout to end... Click for details

Tin Cookie Cutter Scottish Terrier Mid 20th C

Popular Collectibles: Specialty: Kitchenware: Metals Pre 1940: item #714337
B1772

A fabulous tin cookie cutter of a Scottish Terrier applied to a circular base Circa 1920-30's. It is in excellent condition. The base measures 3-3/4 inches in diameter. The terrier itself measures 3-1/4 inches in length, 3 inches in height and 1 inch deep.

Tin Cookie Cutter Reindeer Mid 20th C

Popular Collectibles: Specialty: Kitchenware: Metals Pre 1960: item #714335
B1773

A delightful tin cookie cutter of a reindeer Circa 1940's-50's. It is in excellent condition. It is 3 inches in length, 2 inches in height and 1 inch deep.

Tin Chocolate Mold Chrysler Desoto Airflow Circa 1930's

Popular Collectibles: Specialty: Kitchenware: Metals Pre 1950: item #714334
B1774

An extremely rare tin chocolate mold of a Chrysler/Desoto Airflow car Circa mid-1930's. This car was only made from 1934 to1937. The mold has a model number of 16194. It has two clips for keeping the two pieces together until the chocolate cools. It is in excellent condition with minor scratching on the surface from apparent use. It measures 6-1/2 inches in length, 3 inches in height and 1-1/2 inches wide.

Egg Cups Wire And Wood Set 4 Mid Century Industrial

Popular Collectibles: Specialty: Kitchenware: Metals Pre 1980: item #702954
tr5357

This is a really fun set of 4 retro chrome plated wire egg cups with a blonde wood top ornaments or knobs from England in an industrial mid century design. They were made in the 1960-1970s and are in excellent condition. Quite unusual and a great conversation starter at breakfast! Shipping in the US by USPS priority insured.

Large Tin Pig Cookie Cutter Early 20th Century

Popular Collectibles: Specialty: Kitchenware: Metals Pre 1930: item #702565
B1769

A rare handled large tin cookie cutter of a pig Circa 1920-30's. The cutter is mounted on a rectangular base with an applied handle. It is in excellent condition with original soldering. It measures 9-1/2 inches by 5 inches and is a total of 2 inches in height with handle.