Authentic antique historic US Civil War American Confederate Infantry officer sword Made by Wilhelm Walscheid Solingen hi is listed as the dealer exporting swords to Confederate in References; Confederate Arms By William A Albaugh III and Edward N.Simmons Page 273 American Swords and Sword Makers by Richard H.Bezdek, Chapter 32 European Sword Makers and Dealers Who Exported Swords to Confederate Dealers during the Civil War .Page 449.The cast brass hilt and the pommel of the sword is decorated w...

Outstanding 18th century Falcion Sword made in America. The grip is made of ivory , carved expertly with an animal head. There is a chip at the end of the handle but in good condition, except for one small crack (see picture). The blade is slightly pitted. Crossguard made of iron with a hammered leaf pattern. The crossguard was cleaned up unproperly at some time. The back of the blade at the tip is wider. There is one big fuller on each side. The piece has a beautiful patina...

An early type of gaucho knife, early 19th century, made of hand forged steel with silver and ebony handle. Entire length: 11 ½ inches. Condition: rust pitting on the blade showing age and use.

American Civil War sword dated 186? on the blade at the base. The fourth number is worn out. On the other side of the blade is a manufacture's name. The pommel and knuckle bow stamped with partly worn out number 4 and the guard near ricasso with the number 26. The 1840 model was used by the Confederacy and the Union. Total length: 38 inches, the blade is 32 inches. The sword is in good condition.

US Cavalry saber Model 1840, made by the renowned Solingen firm Carl Eickhorn (stamped on ricasso). Sabers of 1840 pattern were often made by German makers during the second half of the 19th century. Brass guard and pommel cap are and in excellent condition with fine original patina. The wooden grip has remaining old twisted brass wire. 33 inches long blade with broad main and narrow secondary fullers, is in very good condition with no nicks or pitting. Overall length: 38 ½ inches (98cm).

Late 19th century Ethiopian Shield. 11 ½ inches in diameter covered on its outside surface with red fabric and set with low grade silver decorative panels. The inside as well as the handle is also covered by red fabric.

18th century Indo Persian shield (buckler) made from hand forged steel damascened in silver and gold (worn out) with arabesque scrolls. The workmanship is excellent, the shield is well hammered the marks of the hammer used to shape the metal are clearly visible on the interior as seen in the picture, the surface of the shield is nicely smooth. The outer border is strengthened by riveted thin steel strips serrated and pointing inwards...

18th century Indo Persian shield Dhal- Separ made of steel decorated with gold and silver damascening. The shield is decorated with human figures in Persian costumes and around the shield on the border is calligraphic writing inlaid by silver. The workmanship is excellent, the shield is well hammered and the surface is nicely smooth. The border is made of brass and riveted to the steel. In the center are four bosses, and rings on the back of the shield for rope – to hold the shield...

18th century Indo Persian Arm Guard BAZU BAND made of solid steel, well hand chiseled lobed cartouches containing Persian horsemen, all on chiseled and decorated in gold damascening floral ground .Length 12 7/8 inches (32.7cm). Wide at the widest point: 4 inches (11.2cm). Weight approximately 1 pound.

A 19th century circular convex Indian shield DHAL made of brass with upturned rim. The outer surface is profusely chiseled with floral and creeper designs and four engraved domed bosses. The inner side has four ring-bolts. Diameter: 10.5/8 Inches (27cm)

Late Qajar or early Pahlavi Dynasty Persian circular shield Dhal- Separ made of iron decorated with Arabic calligraphy. In the center are four bosses, and rings on the back of the shield for rope – to hold the shield. Diameter; 16 ½ inches ( 42cm) Condition; Shield is rusty.

18th century Indo Persian Arm Guard BAZU BAND made of solid steel with beautifully hand chiseled floral decoration; three lobed medallions in companion of gold damascening stars. Length 13 inches (33 cm). Wide at the widest point: 3 7/8 inches (9,8 cm). Weight approximately 1 pound.