"Made in China" Hardwood carved Top for Tea Caddy or Tea Jar, 1 3/4" diameter and 1" high-outside measurement, 1 3/8" diameter and 3/4" high-inside measurement. The tea caddy must be smaller than inside measurement in order to fit for your tea caddy. The condition is good. I have more than one(1).

Pair heavy Himalayan Brass Lion Altar pieces, 2 1/4" high 2 1/8" wide, 1 3/4" deep, with fierce looking faces. The condition is good.

Tibetan Match Striker, Coral and Turquoise stones set in the embossed and high relief decorated silver and brass borders on Yak skin leather, 3 5/8" high without ring, 6" wide steel striker which is the widest on the bottom. The heavy silver top is also decorated with fine designs which shows the wear. Six metal buttons are studded on the back, surrounded with decorated silver borders. The leather inside is dyed light red color leather. The condition is very good.

Chinese red lacquered Cane or Walking Stick, used the natural shape of tree branch, with carved Chinese figural shape handle, 30" high, 9 1/2" wide on handle, well worn and aged from many years of usage. Some loss of red lacquer finish on the tip of the handle.

Exquisite high quality Chinese Yung Cheng period Export Famille Rose Porcelain Charger, circa 1723-1736, very large and deep, 15 1/4" diameter, 2 1/4" high, with raised overglaze enamel decoration of large Peony flowering branches in the center and outer rim is flaring out after the inner border, and decorated with multiple smaller flowering branches on the outer rim. All the decorations were done in overglaze enamel and high lighted in gold decoration, gold is still brilliant even though some area is dull and worn. There are some small stacking glaze dull areas on the surface but it is very hard to find them. This charger is decorated with a very high quality skillful artist and every detail of the design is highlighted with high relief to emphasize each flowers and pedals. The condition is very good, no damages or restorations.

Pair Chinese Rose Quartz hardstone carved Foo Lions on carved hardwood stands, 3 3/4" high with stand and 2 3/4" high without stand, 3 1/4" wide, 2 1/4" deep, with open mouth. There are some natural grains on the tail and head area. Round hole on the bottom and also on the stand, and tiny chips on the front paw area.

Pair Chinese blue and white Canton Tea Canisters, circa before 1830 and 13 3/4" high-with carved rosewood tops, 12 1/2" high-without tops, 7 1/4" wide square with unglazed flat bottom. This pair of Canton Tea Canisters are very heavy weight with typical Canton decorations of a man on the bridge, sampans in the lake, pavilions with pine and willow trees and two(2) men walking up the hill to the Temple, all the decorations are done in underglaze blue. Two(2) carved rosewood tops(at least 40 years old) came with this pair Canton Canister set, but the owners did not use them on display. There are few very shallow glaze chips on the corners, about the size of 3/4" to 1/4" wide, and frits on the top rims, no restorations or hairlines, both ring like bell.

This Hirado Porcelain Okimono-Daikoku god figure was made during late Meiji period, 3 3/4" high, 2 3/4" wide, 2 3/4" deep, with touch of underglaze blue design in some areas. No damages, there is one(1) Kiln mark on the side of barrel.

Chinese Mother of Pearl Shell carved Plaque, late 18th to early part of 19th Century, 8" high, 8 1/4" wide, 1" high when plaque is flat on the table, with flaming double Dragons in the cloud supporting the Chinese Character in the center. The carving is very fine and detailed three(3) dimensional and lots of open area through out the entire shell plague, the carving was done as thin as 1/32" thick in upper part and gradually getting thicker towards to bottom part. To carve three(3) dimensional and leave a large open area between the design is lot harder than other kind of flat carving, there are more danger to brake the shell while carving with such a fine design and thin stripes of the detailed carving on the thin piece of shell. There are at least four(4) different heights and depth of detailed carving was used to carve the Dragon's face alone, the detail of the carving is extremely well done and so detailed. The color of backside is partially dark purple more like pale Eggplant color in upper area and some rough spots which is natural grain of shell on the bottom thicker area. Everything is all natural colors and no damages or restoration.

Chinese Peking Glass Cup, 1 3/4" high, 2 1/2" diameter-top rim, 7/8" diameter-bottom rim, with translucent lavender color glass, the tiny black spot in the picture is in the glass, no damages. Scratched mark "China" on the bottom.

Chinese Peking Glass Cup, turquoise color, 1 3/4" high, 2 1/2" diameter-top rim, 1" diameter-bottom rim, with scratched mark "China" on the bottom and in good condition.

Chinese black color Peking Glass Cup, 2 5/8" high, 3 3/8" diameter-top rim, 1 1/4" diameter-bottom rim, with few tiny dull frits on top but not sharp.