Dating from the C19th., it stands 7 inches (17.8cms) high (with lid) and measures 7 3/4inches (19.7cms) across the handles. Weight 812gms.
The base is in excellent condition with only some minuscule areas of enamel loss in firing. (Evidence of gilding on top so is original). The base has been broken in a few parts and re-stuck. There is possibly some loss of paste but it is hard to spot on the exterior.
Dating from the C19th., it stands 24.5cms high.
There is a chip to the rim with an adjacent minuscule chip BUT there are no associated hairline so restoration would be relatively simple.
Dating from the C19th., it measures 5 inches (12.7cms) across and weighs 764gms without lid.
The censer is in very good condition with only tiny bits of verdigris. There is a small split in the reticulation to the lid.
Dating from the C17/18th., it meaures 15 cms across the handles.
There is one handle missing and a hairline to the side. It would have had a stand and lid.
Dating from the Wanli period, it measures 4 3/4inches (12 cms) across the handles.
It is in good condition with some calcium accretions and some minor degradation to the glaze to the interior.
Dating from the early C19th., they stand 21.3cms high
Figure 1: has damaage to her cowl and losses to tips of fingers on right hand.
Figure 2: Top of bottle missing, tips of fingers and a couple of minuscule frits to her cowl.
Dating from c1800, they stand 9inches (22.8cms) high.
Figure 1 has tips of 2 fingers on her left hand and a portion of her right hand missing.Also a bubble burst on the back of her cowl (original)
Figure 2 has the tipe of 2 fingers on her left hand and 3 on her right missing.
Both are in otherwise good condition.
Dating from the mid C19th., it stands 3 1/2inches (8.9cms) high.
It is in very good condition.
Dating from the C19th., it stands 9 5/8inches (24.5cms) high.
There is a small firing fault a the base and a very few pieces of kiln grit (see photos). It is in excellent original condition.
Dating from the early C19th., they measure 19cms across.
Plate 1 has 2 areas of damage to the footrim and stress cracks to the enamel.
Plate 2 has one area of damage to the foot rim and very minor stress cracks. There is a very small infill to the front rim at 11 o'clock which I cleaned up for the photos 7&8 above and is barely visible.
Dating from late Qing/ Republic period the set measures 14inches (35.6cms) max. across.
The condition is generally good:-
Central dish: Good
Inner dishes : 2 have small frits to the outer sharp edge and 1 has a filled rimchip.
Outer dishes: 1 has rim frit and 1 has a filled rim chip with associated short hairline.
Dating from the Ming dynasty, it stands 19.5cms high.
The rim is very slightly misshapen and there is a contemporary repair to the foot rim. It is in otherwise good condition.
Dating from the Tongzhi period (1862-74), it measures 7 1/4inches (18.4cms) max across.
There is scratching and some discolouration to the interior base and some wear to the rim gilding with one minuscule fleabite (see photo 12). It is in otherwise very good condition.
Dating from the 2nd half of the C19th., it measures 22cms across.
There is some minor pitting. It is in very good condition.
Dating from the Kangxi period, it measures 9 inches (22.8cms) across.
There are 2 small frits and a glazed over fault on the rim. It is in otherwise very good condition.
Dating from the C19th., it stands 5 3/4inches (14.6cms) high and weighs 1.125kg inc lid.
There is one contemporary inset repair (see photo 10). It is in very good condition. Polished.
Dating from the C19th., he stands 8 1/2inches (21.6cms) high.
He has chips to 2 fingers and his thumb. He is in otherwise very good condition.
Dating from the 1st half of the C18th., it stands 5 1/4inches (13.4cms) high.
There are a couple of shell chips inside the rim of the base. It is in otherwise good condition.