Beautiful Late-Victorian Bar pin with a nicely hand chased pattern in the gold and a substantial garnet solitaire (8.5 mm). The pin is marked 14k on the clasp. Total weight is 0.105 Troy oz (3.4 gms). The clasp and hinge are c1895 era, dating this piece to that time. Measures about 2 1/4 inches long...

Fabulous late-Victorian or Edwardian pansy bracelet. This is masterfully handmade in 14k gold. The Art Nouveau flowers are articulated on each link so that they move independently from the curvature of the bracelet. The pansies are individually hand painted in a silvery enamel, each having a small, 3/16 carat mine cut diamond in the middle. The pansies are about 1 1/8 inch across. The bracelet is about 7 inches long and 1 inch wide...

Fabulous late-Victorian or Edwardian pansy brooch. This is masterfully handmade in 14k gold. The Art Nouveau pansies are individually hand enamelled, each having a small, 3/16 carat mine cut diamond in the middle. The pansies are about 7/8 inch across. The brooch is about 3 1/2 inches tall and 2 1/2 inches across. It has a maker's mark on the back: K-A, with the K reversed/backwards.

It weighs about 0.8 Troy ounces (25 grams). The pin clasp has a ball hinge and an old safety catch...

This is a 1940s-1950s modern ring that is set with three magnificent, high quality mine cut diamonds from the 1890s. This is a unisex ring - equally at home on a man's finger on a lady's hand. The center diamond is approx. 0.5ct and the side diamonds are approx. 0.37ct each. Total carat weight is approx. 1.24ct. The ring is white gold with two contrasting finishes – the rim is shiny, the center has a brushed finish. Total weight of the ring and stones is about 0.165 Troy ounces (5.1 grams)...

This is a superb bracelet with a belt buckle design incorporating three half pearls and black enamel. The workmanship is excellent and condition is very good as well – just a few surface scratches and a few minor dents, which can be expected after nearly 150 years. The inside has a monogrammed date inscription: 27 ноябрь 1863 (27 November 1863).

It is made from 14K gold and is marked on the clasp...

This is a Victorian Mourning Watch Fob Locket Pendant with layered onyx on one side and carnelian on the other, all set in 10K gold. The locket was sealed when I got it, but I opened it. Inside is a sealed side with something in it! The other has a picture holder with no picture in it. The “glass” appears to be rock crystal and is broken. Dates from the 1880s.

There is an example of this type of locket on page 200 of Collecting Victorian Jewelry by C. Jeanenne Bell (KP Books ©2004)...

Nice bar pin with an unusual pin and clasp. The metal is approx...

Nice Victorian bar pin with an old style hinge and early safety clasp. The metal is gold-filled base metal or silver. The pin has 15 seed pearls on the front on a slightly crescent shaped bar. Marked on the back with a logo that I do not recognize (see photo). Measures about 1 1/2 inches long and 1/8 inch wide. Excellent condition....

Nice repouse bar pin with an old style hinge and early safety clasp. The metal is gold-filled base metal or silver. The design has a center round seed pearl and two round turquoise beads. The various design elements are applied to the base. No marks. Measures about 2 1/8 inches long and 3/8 inch wide. Excellent condition....

Nice hand made bar pin with an old style hinge and early safety clasp. The metal is 10K gold and is marked on the clasp. The three rubies are prong set and the design includes two hand chased leaves. No maker’s marks. Measures about 2 1/4 inches long and 1/4 inch wide. Excellent condition....

Nice hollow body bar pin with tubular hinge and C-clasp. The metal is approx. 9K gold – not marked, but tested. The front design of leaves and branches includes a bird in the center. The entire design is hand chased. No maker’s marks. Measures about 2 inches long and 5/8 inch wide. Very good condition, with minor wear on the corners and an old repair to re-attach the hinge for the pin....

Beautiful flower with petals and leaves made of faux tortoise (celluloid?) or nut casing. The flower is suspended on a spring on the end of the hairpin so that it trembles. The flower is about 2 inches by 2 3/4 inches and 3/4 inch deep – very 3-dimensional. The spring attaches to a 3 3/8 inch long two-prong hairpin. Condition is excellent for such an old, delicate piece. One petal has a spot of surface damage and one leaf is partially loose. Not much, considering … ...

This is a beautifully made hollow body pin. The back appears to be low karat gold or gold-filled. The front is 14K yellow gold, set with a nice little diamond (about 2mm) and decorated with enamel in-laid flowers of turquoise and white. The pin back has a C-clasp, which is marked with a G inside a diamond shield. Measures about 7/8 inch across. Excellent condition, although the diamond is securely set with just four of the five original prongs – one broke long ago....

This is a scatter pin made from 19th Century United States silver coins. I originally had a pair of these Victorian LOVE TOKENS, but just sold one of them. The coin is a Liberty capped bust half-dime from 1835. One side of the coin has been ground flat and engraved with the initials PBJ (or maybe PBI – the script is quite fancy and the third letter is ambiguous). The pin is gold-filled and dates from the late 19th century, with a C-clasp and tubular hinge. Excellent condition. JUST ONE A...

This is a beautiful Art Deco era Bar Pin. It has a clear 3mm (1/8 carat) diamond set in the middle of an 18-karat white gold filigree setting. There are eight small dark blue sapphires, four on each side of the diamond.

The pin clasp is an odd type that was used around the turn of the century, but I would estimate the age at sometime in the 1920s. The clasp is marked 18K. About 0.15 TOz total weight. The pin is about 2 3/8 inches long and 3/8 inch wide....