All Items : Vintage Arts : Furnishings : Lighting : Ceiling Fixtures : Pre 1980 item #1239626 (stock #ha-1179)
This magnificent contemporary chandelier features a circular gilt metal frame with hoops decorated with crystal beads and faceted, square shaped crystal chain across the waist, and a white frosted glass coupe with finial. Wired and ready for installation. Measures 28" across and 16" tall.
All Items : Vintage Arts : Furnishings : Lighting : Ceiling Fixtures : Pre 1980 item #1239497 (stock #ha-1505)
This pair of vintage nickel-plated chandelier are wired and ready for installation. Measures: 30" tall and 24" wide.
Vintage Views Consignment & Consulting
This pair of gilt bronze candelabra feature five candle arms decorated with acanthus leaves, set upon eagles perched upon spheres raised on pedestals with clear glass. Each measures 29" tall. They date from the mid to late twentieth century.
All Items : Vintage Arts : Furnishings : Lighting : Sconces : Pre 1950 item #1080502 (stock #ha-1016)
This pair of sconces feature polished and lacquered brass frames and green tinted glass, similar to the 1930s and 1940s designs of Pietro Chiesa for Fontana Arte of Italy. They are unmarked and the manufacturer and designer are unknown. Dimensions: 28" H X 14.5" W X 6.5" D (71.1 X 36.8 X 16.5 cm).
This lamp by the Aronson Art Metal Works, dated 1923, depicts a lovely female within Egyptian sarcophagus. Measures 11" (to top of socket) by 3.5 by 4.5". Has a modern brass socket and partial wiring, in need of cord and plug. There is obvious wear to the cold-painted decorations.
This lighted pedestal with built-in magazine rack has been attributed to Neal Small for Kovacs, circa 1970. Condition is excellent, with no deep scratches or pitting. It has two sockets and original cord with on/off floor switch. It also has its original frosted glass top with no damages. Measures 34.5 by 12 by 12 in. Additional images forwarded upon request.
This lamp by Curtis Jere dates from circa 1977 and features a chromium-plated cylindrical base, with hole in the center which sprays light upward into a forest of metal stems. The design is reminiscent of the spray sculptures of Harry Bertoia. Condition is excellent. There is very little corrosion and no deep scratches. Only a remnant of the ink signature (the "C" in the copyright mark) remains on the top of the fixture. Measures 28.5 in tall and 10 in across (72.4 cm by 25.4 cm). za-
All Items : Vintage Arts : Furnishings : Lighting : Sconces : Pre 1980 item #1053211 (stock #za-387)
PRINT E-MAIL DEALER E-MAIL DEALER'S INVENTORY ADD TO MY FOLDERS DEALER BIO PRICE $2,900.00 DESCRIPTION This pair of sconces, attributed to Venini by Rago Modern Auctions, have a cylindrical shape and are crafted from mottled sommerso glass with a textured surface, and metal frames with brushed surface. Condition of each is excellent, with no chips or visible cracks. Each has an on/off pull chain and each is believed to be in working condition...
All Items : Vintage Arts : Furnishings : Lighting : Torchiere : Pre 1970 item #1032703 (stock #za-165)
This vintage aluminum lamp from the 1960s or 1970s features three spun aluminum cylinders, the widest of which measures 5 inches across. Designer and manufacturer are unknown. Possibly by George Kovacs or Robert Sonneman. Each has its original socket. The socket in the largest tube rests at the bottom, while the sockets in the smaller tubes are fixed toward the top. Condition is very good. There are a few dings and light scratches, consistent with age...
This rare and important design by Gianni Colombo (Italian, 1937-1992) is known as the Gea lamp and was produced in Italy by Arredoluce, circa 1970. Measures approximately 5.5 in (14 cm) in height, width and depth. It accepts a 25 watt bulb and features a sliding window to direct light from front to rear. It has its original cord and plug for the Italian electrical standard, but may be used in the U.S. with a plug adapter as shown in our images...
This innovative and influential "BT2" lamp was designed by Gruppo Arditi with Gianni Gamberini and produced in Italy by Sormani in 1971. It is crafted from wood block covered in steel sheet, and wire ending with clear plastic cylinders with magnetic ends and containing small bulbs. When the cylinders rest on the metal plate the electrical circuit is completed, causing the bulbs to light and the plastic housing to glow warmly...
This fantastic mid-century brass floor lamp, attributed to Arredoluce, has its original polished and lacquered finish, and is in excellent overall condition. Shades measure roughly 14" long and have their original red, green and yellow painted finishes. Arms swing up and down and the shades may also be adjusted up and down. There are some scratches and small areas of paint loss, consistent with age. With upper arm in highest position the lamp measures 81.5" (207 cm) tall...