Outstanding Victorian figural picture frame in the form of a map of Australia! The metal is very heavy gauge and the coloring is white (I believe it is constructed of white brass with a yellow-tinted lacquer)...

Victorian brass figural picture frame in the form of a medieval knight's shield with a halbeard and lance. Cut from heavy-gauge brass, this frame shows great originality and design sense. The back has a hinged easel.

Origin: England, ca. 1880. Condition: excellent. Size: 8" x 5".

Fabulous brass and copper picture frame in the Aesthetic Japonaise style. The basketweave pattern of the brass frame is detailed with raised copper decorative elements that include a crane standing in a stream, bamboo and cherry blossoms. The back has an easel. The frame is 3.5" x 2.75". The oval opening with glass is 2.25" x 1.5". Circa 1870.

Nice Victorian brass ladies' lace-up boot. This example has holes drilled to represent the holes for laces. The Victorians often placed these along their mantles for purely decorative purposes.

Origin: England or America, ca. 1880. Condition: excellent, light scratching near the toe. Size: 4.5" tall.

Strong EA Bliss elements and design yet unsigned. This reminds one of this maker's work. Richly ornate. What wonderful pieces these sash ornament buckle pin brooches can be!
Note the 1" X .5" Turquoise (stablized?) bezel set center of the glorious gilt gold engravings and etchings of flowers, leaves, scrolls
Just under 3" X 1.75"
Weighs 1.1 Oz or 31 Grams.
Very strong sturdy pin stem from an almost 'tube hinge' and wide "C" catch...

Handsome Victorian covered brass box with a beaver finial. The beaver is cast in bronze and is shown chomping on a tree stump. The detail and workmanship on the finial is excellent. The box will polish very nicely, but we have left the original patina.

Circa 1890. Condition: excellent, a small ding at the bottom edge. Size: 5-3/4” tall; 2-7/8” diameter.

Three lobed shamrocks happily travel around the parameter of this circa 1900 brass sash buckle pin ornament with a faux hasp and early C catch. While these wear worn then on waist sashes to give the appearance of a buckle, their versatility allows one to wear them on any article of clothing.
Just under 3" X 2 1/8 and weighs a sturdy 1 oz or 29 Grams...

A Round Brass Inkwell from the Victorian Period, with Underplate. Dimensions; 9" diameter tray (5" inkwell) x 5.5" high. Late 19th century. Pin Replaced, but in Very Good Condition.

An elegant late Victorian jewelry box in the Louis XVI style. The sides and lid are decorated with delicate raised birds and floral sprays against a stippled background. Engraved volutes at the corners accent the main decoration. The edges are decorated in a typical French bound reed design. The whole is raised on turned feet. The brass plating is beautifully patinated to a lustrous sheen.

Ca. 1890...

Outstanding brass match holder the pocket formed in the shape of a shield and punch-decorated in a stars and stripes pattern. The pocket is surmounted by a punch-decorated American eagle underneath the motto “In God We Trust”. This motto was adopted in 1863 as a subtle government reminder during the Civil War that God was on the side of the Union troops fighting to end the evil of slavery. The backplate has a punchwork border and also a hole for hanging.

Origin: America, ca. 1860s...

Worthy as a movie jewelry prop! Very antique circa 1900 Victorian long bookchain necklace with Arts & Crafts Art Nouveau era influences worthy of a jewelry feature or as a jewelry prop for the next movie or theater production. Very early Downton Abbey like piece.
Bookchains are quite often seen as chokers, while this one is double the length! The need for it to place flat requires that it be either short or this length...

A handsome Imperial Russian medium-size hammered brass oval tray with cast brass handles. A tray of this size would probably have been used to serve vodka, and could still be used as a cordial tray or even on a buffet table. One end is stamped with the maker’s name and the Imperial Romanov double eagle warrant. The handles are attached with copper rivets and are cast in a ropetwist design.

Origin: Russia, last quarter 19th century...

Rare hammered brass three-handled loving cup or wedding cup from Russia's Imperial era. The tapering form is nicely accented with forged strap handles attached to the sides with copper rivets. The bottom is stamped with the Imperial Romanov double eagle and the maker's name.

Origin: Russia, ca. 1880. Condition: excellent, no polishing. Size: 4" tall.

An American Victorian Brass Three Arm Candleabra or Candleholder. Dimensions; 12" wide x 9.25" high. Weight 3 pounds 8 ounces. Very good condition. Circa 1880-1900

An Impressively Grand English Victorian Brass Inkstand or Standish with Double Inkwells. It is 21.25" wide x 9" deep x 7" high and weighs 3 pounds 8 ounces. It dates from the latter part of the 19th century and is in excellent condition, except for a repair one of the legs (only visible from the bottom, see picture).

This magnificent handcrafted Art Nouveau figural brass letter opener is the nicest one I have seen, with intricate detailed "Spirit of Life" maiden wearing a flowing, draped gown, one arm resting on back of head, the other catching her windswept gown, standing on a base of sinewy bark surrounded by clover, circa 1890's, very heavy. Measurements: 10 in. high. Condition is near perfect.

This fanciful Art Nouveau style brass desk box was originally made to hold stamps but would be a great place to store a special ring, cufflinks or a secret. Rectangular shaped, standing on four feet, the hinged cover has a centered sunflower surrounded by leaves and vines, two compartments inside, unmarked. Measures 3 in. x 1 5/8 in. x 1 1/4 in. high. Condition is near perfect.

Pair of English brass Georgian telescopic ejector candlesticks, c.1800. Size: 6.75" - 9.25" height x 3.5" x 3.5". Condition: Some tiny stress cracks to the top of the lower section of one candlestick (see photos detail). Also, one stick requires extra effort to get it to remain in the fully extended position and probably required some sort of new dampening material to keep it in place.