A katchushi mutsu-gata sukashi tsuba. The six lobed, thin plated armorer's tsuba with good tekkotsu and with openwork decoration was described by Skip Holbrook (ex collection) as Saotome made and depicting three birds. The Saotome were a line of armorers (katchu) turned tsuba makers...

Antique Japanese tsuba (hand guard for a samurai sword). Made of bronze in the form of bending grain and leaves inlaid with gold details.
Meiji Period (1868 -1912) Size: 2 3/8" long x 1 7/8" wide.

An armorer's tsuba, with very slightly raised rim on the strong, flat iron plate. Pierced decoration of a shrimp with pleasing, subtle swell along the antennae and legs (mostly on the ura.) Small, irregular brass inlays for the eyes (missing from one eye - not conspicuous.) The kogai-ana plugged with a copper rich alloy. Oval form about 2 7/8" (7.3 cm) by 2 3/4" (6.985 cm). Thickness at rim about 5/32" (.39 cm). Late 16th century to early 17th century - perhaps Momoyama period...

Antique Japanese menuki of a snarling fu dog's head over gilt flowing "fabric", made with gold ,silver, shakudo,copper and bronze.. Menuki are one of many components to a Japanese sword, mounted as an ornament on the tsuka (handle). They are believed by some to secure the swordsman's grip. Size: 1.75" long, .5" wide

19th century shakudo Japanese sword tsuba with inlaid decoration of autumn grasses on both sides, all on finely textured ground. Shakudo (an alloy typically consisting of 96% copper and 4% gold) body, superb design perfectly capturing the mood of autumnal melancholy. Crisp work, black shakudo stems and gold seedheads, in excellent condition. Height 2 3/4 inches.

Pair of early 19th century menuki - Japanese sword fittings - each depicting a wasp in different attitude on a tube containing their eggs. Shakudo with gilding, fantastic design, superb casting and detailing, beautiful patina. Length 1 7/16 inches.

A well forged, handsome mokume tsuba in mokko-gata form with katakiri-bori landscape decoration on both the omote and ura. The mokume grain is large and well controlled reminding one of ayasugi hada. In fact, this tsuba is indeed a tosho (swordsmith's) tsuba, being made by [Kai Ju] Kiyonaga and dated the third year of Bunkyo (1863) believed to be the same as KIY 298 referenced in Hawley's, Japanese Swordsmiths...

Pair of early 19th century Japanese sword menuki depicting two dancers - a samurai with sword, and a merchant with fan. There is a nice detail for a netsuke lover - merchant is wearing an inro suspended by a gourd netsuke. Elegant design, superb detailing with gilding, in excellent condition. Fantastic example of Japanese metalwork. Height 1 1/8 inches.

A rare oval und convex shaped Japanese iron sword guard with two amaryu in gold nunome. Condition: good. Dimensions: 6,9 cm high x 6,1 cm wide.

Unusually large 18th century or earlier Japanese sword iron tsuba with pierced decoration of three dragons fighting among scrolling vines. Strong early piece with numerous perforations and three dimensional work, crisp detailing, gilding, excellent wear and patina consistent with age. Height 3.63 inches, width 3..44 inches.

The Katchushi style of this tsuba gives it an earlier look and feel. But it is probably an Edo period work (might expect more wear on the seppa-dai or more conspicuous tekkotsu on an older example.) The thin body nonetheless resilient. Strong, sparse, decorative file marks on the vertical add to character. Adept use of the file, thin plate and slight taper toward the rim could support argument a swordsmith may have made the tsuba...

A katchushi (or armorer's) tsuba, probably Myochin, with pierced decoration of ship's rudders (the significance being a comparison of rudders steering a ship to values guiding a Samurai's life choices.) The strong, homogenous, dense iron plate with only light tekkotsu and smooth to the touch. Dark patina. Momoyama to early Edo. Good condition: Lamination folds with openings evident on the surface of one side. Ex Skip Holbrook collection. 3 3/32" x 3 1/16" x 1/8" (7.8 cm x 7.7 cm x .32 cm)

An antique Japanese bellow (called Fuigo) made of Suginoki (Cryptomeria) wood. Used by sword makers and metal craftsmen to blow air into a Kama to increase the temperature of the fire.

Age: Meiji Era (1868-1912)

Dimensions: 19 3/4" Wide by 11 1/2" High by 6 3/4" Deep

18th century or earlier Soten school Japanese sword iron sukashi tsuba with pierced decoration of four samurai with swords and bows among pine trees by a waterfall. Wonderful early work, great design, powerful piece. Signed, the left side of the inscription reads SOTEN, the right one must be the name of a particular artist. Height 2 3/4 inches.

Japanese Edo Tsuba w Flying Dragon

Description & Size: 7.87 x 8.38 x 0.58 cm (3.1" x 3.3" x 0.23") height & wide & thickness

Age: Edo Period; Material: Iron, Silver & Gold; Production: Handcrafted & Forged

This is an a nice & hand forged Japanese Edo Tsuba with a flying dragon. The dragon has gold inlaid on the eyes & whiskers, it's also dotted with silver around on both side of the tsuba. The tsuba has a silver cover fukurin...

Antique Japanese large tsuba (samurai sword hand guard). Cast in iron with an intentionally uneven surface to suggest a sandy beach or rock and further decorated with mixed metal inlay in the form of a variety of sea shells. Shakudo and gilt copper stand out against the dark iron. With collector's kiri wood box.

Age: Edo Period (1603 - 1867)

Dimensions: 3 5/8" x 3 1/2"

Late 18th to early 19th century iron Japanese sword tsuba with multimetal inlays depicting sennin Bukan Zenshi standing under a rock and waving for his faithful tiger to approach, which the beast seems to be very happy to do, the back showing mountains with pines and a waterfall. Bukan Zenshi (Pu Hsien in Chinese) was a 7th century priest and is usually shown with a tiger as his attendant...

A large Tembo tsuba. The Tembo (or Tenpo) style evolved from the Saotome school and the sukashi decoration of Okiagari here (an especially nice feature) carries over. Okiagari are self righting toys and the subject was a symbol of inspiration to Samurai in aspiring to improvement and the right path in life. There is, on a curious level of interest, some minute trace of old gold decoration (long since worn off) on the surface of this tsuba...

19th century Japanese kozuka (sword knife) handle depicting a lobster and some fishing implements including a straw raincoat and a woven ring. Clever design of the terminus as a curled lobster, superb crisp work - see the fine differentiated textures of the crustacean’s body, ring and long strands of the coat...

Cut iron tsuba. Mysterious motif where two spades appear which should represent spearheads or swords. The tail of Japanese dragons is sometimes depicted in this way. The decor is simple but very elegant. The carving as well as the finish are very neat. Difficult to date with precision. Probably from the Edo period, maybe earlier. Wide: 79mm Thickness: 5mm Good condition

Pair of early 19th century menuki - Japanese sword fittings - each depicting different hanaike - hanging container for flower arrangement, one made out of a bamboo stem, the other out of a hollow double gourd. Fantastic unusual design in Japanese taste, excellent casting and detailing, beautiful patina. Length 1 7/16 inches.

Late 18th to early 19th century Japanese sword iron tsuba decorated on the front with 3 scholars and an attendant under a pine tree viewing the moon partially obscured by the clouds. There is yet another scholar on the back of the tsuba looking towards the moon as well. Excellent piece with gilding, multimetal (gold, silver and shakudo) inlays and precise detailing - see the incised textile patterns on the golden robe of the scholar on the back. Some wear, overall in excellent condition...

Pair of early 19th century Japanese sword menuki depicting young Yoshitsune and Benkei at the Gojo bridge in Kyoto. For an account of this significant encounter see H. Joly LEGEND IN JAPANESE ART, p. 82. Do not photograph well. Shakudo body, silver inlaid highlights, in great condition. Length of Yoshitsune menuki is 1 inch.

Pair of 19th century Japanese sword menuki each depicting an undulating dragon among clouds in different attitude. Did not photograph well - photos came out too harsh. Excellent design, bronze with fire gilding, superb casting and detailing, beautiful patina. Length 1 7/8 inches.

18th to early 19th century iron Japanese sword tsuba with multimetal inlays depicting a tengu in flight among swirling clouds above city roofs as he carries a stolen jar of oil or sake that he carries in a string, two inlaid inscribed silver plaques. Design continues on the back showing a tall tower and more roofs. Tengu are mythological creatures half men, half birds, usually depicted as goblins, and first-class fighters. Wonderful subject, excellent detailing, inlays in various metals...

Antique Japanese iron tsuba or hand guard for a sword, in a mokko or melon shape, decorated with motifs of thin tree branches with plums and blossoms, with silver and Shokudo inlay, and an engraved sun in the top corner. The backside has a small cluster of plums inlaid with silver. Size: 3" height, 2.75" width

Pair of 19th century Goto School menuki - Japanese sword fittings - each depicting a puppy with collar in different attitude. Superbly beautiful shakudo with characteristic black surface, crisp casting and detailing, wonderful patina. Come in very well made fitted kiriwood box. Length 0.8 inches.

19th century Japanese kozuka (sword knife) handle depicting Ebisu - one the Seven Gods of Good Fortune, that of fishing - happily hanging out in a humble boat by reeds in a stream...

18th century Japanese sword iron tsuba with pierced decoration of a tiger frolicking by a thick stem of bamboo with leaves, 2 sides presenting back and front views. Delightful design, good work, wonderful face of the creature, gilded highlights, very pleasant feel of age. Height 2 15/16 inches.

Pair of early 19th century Japanese sword menuki depicting lobsters on a bed of sea weeds. One menuki has Daikoku mallet on top (stands for wealth), and the other a character meaning long life. Excellent work with great detailing - see various textures of the shells. Bronze with coppery patina, gilded water drops on the sea weeds, overall in great condition. Length 1 9/16 inches.

19th century Japanese kozuka (sword knife) handle depicting a a centipede wrapped around an arrow. Unusual and elegant piece, extraordinary crisp work - see the head and body segments of the creature and fine feathers of the arrow. Gilding, finely textured ground called nanako, which means “fish-eggs” as it resembles fine rows of caviar, in great condition. Length 3 3/4 inches.

A simple, four lobed armorer's tsuba with simple pierced decoration perhaps depicting a landscape with structure. The udenuki-ana (cord holes) have the effect of completing the illusion of a Sesshu-like landscape. The saotome were armorers turned tsuba makers who worked in this manner and scale. Good condition with good tekkotsu. Sengoku era. 2 15/16 (7.46 cm) inches x 2 5/8 (6.67 cm) inches

18th century Japanese sword iron tsuba inlaid with cloisonne flowers, brass scrolls and cloisonne mon (crests) of the Tokugawa clan and containing three aoi (hollyhock) leaves. Strong early piece with very good work, wear and patina consistent with age. Height 3.2 inches, width 3 inches.

18th century Japanese sword iron tsuba with pierced design of “hundred monkeys”, all in different attitudes. Excellent early piece with numerous perforations requiring enormous amount of work, precise detailing, gilded eyes of the creatures, wear and patina consistent with age. Height 2.74 inches, width 2.7 inches.

18th century Japanese sword iron tsuba with pierced design of four roundels with crosses among scrolling vines. Crosses may be namban (Christian) symbols or the mon (samurai family crest) of the Shimazu clan of Satsuma province. Excellent early piece with numerous perforations requiring enormous amount of work, precise detailing, gilding, wear and patina consistent with age. Height 3.06 inches, width 2.71 inches.

Early 19th century iron Japanese sword tsuba for tanto with raised and inlaid decoration of a shojo dreamily looking at a huge pearl on a rock in front of it, a paddle with wet working end at the end of the rock. Shojo are mythical creatures living near the sea, who are particularly fond of sake. Excellent design, great quality inlays - see the silver inlay on the paddle indicating that it is wet, beautifully inlaid textile patterns, excellent patina. Height 2 1/4 inches.