Catalog (525)

Composed of delicate vertical leaf fronds, this necklace looks to be of fine gold, but is really made of gold-plated metal. The bright surface shows very little wear, due to Krementz & Company’s rolled gold-plating process used on the Newark, NJ, firm’s best lines of costume jewelry. The leaves are textured with detailed lines produced by careful engine-turned engraving. The chain is composed of tiny cylindrical pieces secured to a fine wire so that they are stabilized. There is a spike and drum closure, and the script Krementz signature appears on the back of one leaf. It dates from the 1950s. Each leaf measures a little over 1 1/4 inches long; the necklace measures 15 1/4 inches long.

Delicate, leafy openwork distinguishes the sterling silver frame of this 1950s pin. It is set with a chrysoprase disk that has a transluscent ‘cobblestone’ pattern when held to the light. The back is marked sterling, and has a secure rollover safety clasp. The stone is in lovely condition; the pin looks to have been hardly worn. Total diameter is 1 3/8 inches.

This substantial 1950s sterling silver pin is formed as molded leaves, with applied flowers and a vine at the base. It was made by the Bauring Company of Long Island City, NY, and is so marked on the back. There is a secure safety clasp. The piece measures 3 1/4 inches long by 2 1/8 inches wide.

Here is a substantial 1970s handmade ring composed of a hammered disc mounted on a thick band. It is marked 925; there is no maker’s mark. The disc measures 1 inch in diameter; the ring size is about 8 1/4; the band is adjustable.

These earrings have a crafts-like and substantial feel, composed of applied sterling flowers, leaves and vines on a sterling silver backing. The clip backs are very secure; the earring backs bear what looks like a partial C, possibly for Cini. They measure 1 inch by 3/4 inch. Weight: 8.1 grams total

This sterling silver bangle, made of one continuous piece, is completely hand-hammered, with an interesting concave design. It is marked sterling and with an interlocking, angular ‘KG’ to indicate the unidentified maker. The bracelet is very sturdy, which comes from the hammering process, but is flexible enough to slide onto the wrist. The terminals each measure 3/4 inch from top to bottom. The concave side measures a little over 1/2 inch in width. The bracelet measures a little over 5 1/2 inches from one end to the other, with an additional 1-inch opening. Weight: 15.3 grams

This delicate and detailed sterling silver gilt and fresh water pearl pin was made by the Newark, N.J., firm of Link & Angell, c. 1910. It is in the form of a maple tree seed and pods, and is beautifully and realistically formed down to the veins in the seedpods. The pin measures 1 5/8 inches long by 3/4 inch from the tip of the pod to the curve of the stem. It is stamped on the back with the L&A mark and ‘sterling.’ It has a modified C-clasp indicative of the early 20th century. Condition is excellent; there are no breaks to the silver, and no repairs. The pearl is very secure, and the clasp is in good working order.

This Victorian sterling silver hinged bangle bracelet has hallmarks for Birmingham, 1884, and the unidentified maker’s mark of RJD. It is richly decorated with an applied embossed band of tiny starbursts within ovals, rimmed with delicate openwork. There is some roughness at the clasp, but it is secure and the pieces of the bracelet fit together nicely with a strong click. There is a shallow area of impact on the back near the clasp that is very hard to notice, as well as some scratches that contribute to the softened patina. Interior circumference is about 6 3/4 inches, and diameter is 2 1/4 inches; the bangle width is 3/4 inch. Gross weight: 24.6 grams

Decorated with applied grapes, vines and gold leaves, set with an amethyst, this arts and crafts cross pendant is probably English and reminiscent of the work of Henry George Murphy, though it is unsigned. The gold is of a low (probably 10) karat. The cross is suspended from a later sterling chain. It measures 3 inches long by 2 3/8 inches wide; length including chain is about 14 1/2 inches. Gross weight: 22.4 grams

These highly decorative cuff links, made by Gorham Co. of Providence, RI, feature deeply embossed scrolls enhanced with green enamel paint. The bar on the back of one of the links looks to have been replaced, though it appears to be of the period. While the bar on one is marked sterling, the bar on the other appears to have been silver-plated, with most of the base metal now showing. All of the discs are marked on the reverse with the Gorham sterling mark, the 1898 date mark and the number 120. They measure a little over 3/4 inch long by about 1/2 inch wide.

Renoir of California had an affinity for primitive art, and the design of this bracelet is a good example of that inspiration. Part of the company’s Matisse line of enameled jewelry, this bracelet features oblong copper panels of two lengths decorated with blue enamel with white specks. The fold-over clasp is marked ‘Matisse’ on the top. There are some minor edge chips in the enamel on the back. It measures about 7 inches long by 1 1/4 inches at its widest point.

Here is a nicely designed, solid pair of Mexican sterling silver earrings. They are decorated with balls and curls around center squares, defined by a subtle patina. They are marked sterling, but bear no maker’s mark; the clip backs are in good working order. They measure about 1 inch square.

These two-sided 14kt-gold cuff links are decorated with engine-turned engraving on white gold and are edged in yellow gold. The bars on the backs are marked P14K. There is some minor scratching, as shown in the photo. They measure a little over 1/2 inch.

Formed in the shape of coral-like branches and set with what appears to be a gray pearl, this delicate sterling silver pin was made by Otto Robert Bade of New Hope, PA. Bade was a prominent designer for Francisco Rebajes, and purchased the company in 1958 from. Bade renamed the firm Orb, which ended production in 1971. The pin is marked ‘Orb’ on the reverse and is secured with a safety clasp. It measures 2 inches long by 1 1/4 inches wide.

This bracelet is constructed of six hinged panels designed as leaves and berries, with a fold-over hook clasp. It is marked on the back of the clasp with the Mexican maker’s mark of ETD, which is unidentified. It has a nice warm patina, and two of the berries have very minor impact marks. The bracelet measures 7 1/4 inches long by 3/4 inch wide. Weight: 34.4 grams

Here is a nicely designed bracelet with a primitive feel and a classy look. It was made by Renoir of California, and has a secure fold-over clasp and the Renoir signature on the back. It lays nicely on the wrist. It measures 7 1/2 inches long and 1 1/4 inches wide. (See our listings for matching necklace and earrings.)

This lovely pin has hand-applied calla lilies and leaves on a shaped flat panel, with lovely detail and nicely aged patina. The safety clasp is secure, and the pin is marked sterling on the back. It measures 1 3/4 inches long by nearly 1 inch at its widest part.

Here is a copper necklace with a sophisticated look that works for a variety of occasions. Made by Renoir of California, it lies neatly around the neck like a collar of copper fringe. It is nicely designed with alternating groups of graduated flat links, and has a secure fold-over clasp that bears the Renoir mark. Copper is almost as bright as the day it was made, mostly due to Renoir’s special coating to preserve the metal’s luster. Total length is 15 inches; widest links measure 1 inch. (See our listings for the matching bracelet and earrings.)