Catalog: Estate Jewelry: Silver (346)

A forged wire pendant composed of drops of various lengths is attached to a chain of shorter, peaked forged bars linked by securely soldered rings. The necklace has a nice heft, but it quite comfortable. The back bears the circular impressed Mexican silver mark with central maker’s initials of possibly OBC, and the eagle 1 mark. The necklace measures 19 inches long unclasped; the pendant drops 4 ¼ inches. Weight: 56.1 grams

The clean design of this silver pin features two adjoining concave oval disks with applied silver beads in the center, all mounted on a forged wire frame. The piece exhibits fine construction and is quite substantial. There is a secure C-clasp on the back. The side bears the maker’s mark of Hans Jensen & Co of Århus, Denmark (1957-1970), as well as the mark for .830 silver. The pin measures 2 inches long by ¾ inch wide. Weight: 6.6 grams

Shaped as stylized heads, they are hollow cast and pierced for stringing. Faces show on both sides of the beads. One bead has a casting imperfection on one side (see Photo #1); the other side is intact. There are a total of 19 beads; strung together they measure 9 inches long. They are possibly Mexican. Weight: 21.6 grams total

A nice studio piece cast as a stylized calla lily leaf that hugs the finger, regardless of which way it is worn. The ring has a warm patina from age. The rounded band bears the maker’s mark of A. Duclos, with other unidentifiable marks that may indicate country. It is a size 6 ½. Weight: 16.3 grams

The pendant is composed of hollow construction, with a sharply molded flower border and hammered center. It is probably Danish, made in the 1940s-1950s, and is marked 800 on the back to indicate silver content. There is a tiny hole in one of the flower centers, as shown in the photos. The pendant measures 2 inches long, not including the bale, and 1 ½ inches wide. Weight: 9.1 grams

This delicate, charming silver gilt bar pin features lavender guilloche enamel work surrounded by a thin border of black enamel and a milligrain-like textured edge. Three circles of white enamel grace each end of the pin. The pin bears the mark of Marius Hammer, Bergen, Norway (1847-1927), and dates to the early 20th century. The original C-clasp has been expertly replaced; the piece retains its original pin stem. It measures 1 5/8 inches long by a little over ¼ inch wide at the center.

An ornate piece of cast work featuring flowers, scrolls, garlands and scallop shells. The pin is set with a central faceted rectangular citrine, tiny pieces of orange glass and seed pearls. The C-clasp is secure; the pin stem is struck with a special Hungarian mark used from 1937-1999 indicating a piece that may have left the country temporarily, as for an exhibition. The brooch measures 1 ½ inches long by 1 1/8 inches wide.

A hinged bangle of irregular, wavy design, solidly cast, by prominent Taxco designer Erika Hult de Corral. The spring mechanism is in good working order, keeping the bracelet securely in place. The bracelet has a 6 ¾-inch inner circumference, and is quite comfortable to wear. It bears the maker’s ‘Ric’ mark, as well as the Mexican eagle mark for sterling. Gross weight: 53.5 grams

Formed as parrots with flowing tails, with sharply molded detail. One clip mechanism is slightly loose, but both are in good working order, with a patent application number that dates to 1931. The backs bear the Los Castillo/Taxco/Made in Mexico marks, as well as the design number of 168A. Each bird measures 1 7/8 inches long by 1 3/8 inches at the widest part. Gross weight: 26.6g

Pendant composed of the inside of a conch shell that is mounted in wound sterling silver wire. The chain of twisted sterling silver bands is stamped 925 and has a secure pressure hook clasp. Each connecting ring is soldered closed. Clasped, the necklace measures 17 inches long, including the pendant.

Mounted with an oval banded carnelian cabochon, the pin is marked 800 to indicate silver content. It could be European, but has Asian elements to it as well. The rollover clasp is an older style but very secure, with a sturdy pin stem. The design features applied wirework and beading, and rough, scalloped edges trimmed in twisted wire. There are two larger silver half-beads, one at each side; one exhibits a small dent, as shown in Photo 5. The pin measures 1 5/8 inches across.

This sterling silver bar pin is cast as three poinsettias. It has a nice heft and is very well made. It is probably American, with a conjoined JR 43 mark on the back. The rollover clasp is in good working order. It measures 2 ¾ inches long by 1 1/8 inches wide. Weight: 13.3 grams

ThIs whimsical pin, formed as a six-petal flower enhanced with tiny blossoms, is mold-pressed but of a sturdy quality with sharp details. The back features a secure modified C-clasp, which bears the maker’s mark of Hermann Siersbol of Kastrup, Denmark. It measures 1 3/8 inches across. Weight: 6 grams

Of flexible and hand-wrought construction with bezel mounted teal ceramic oval pieces at the terminals. The band shows a warm patina with some roughness under the edge near one end. The outer band shows either a partially obscured mark for sterling or a maker’s mark. It has an 8-inch inner circumference, and is 3/16 inch wide.

An unusual link bracelet composed of delicate openwork panels. The box clasp is secure and is engraved with script initials of FW. The back of one panel shows the Swedish silver mark, an unidentified maker’s or town mark and the mark for .835 silver. The clasp is secure and comes with an attached safety chain. The bracelet measures 8 inches long by 9/16 inches wide. Weight: 16.5 grams

A clean, modernist design characterizes this ring, which is composed of a graduated rounded sterling band inset with an irregularly shaped piece of teak or rosewood. It mostly likely dates from the late 1960s to mid-1970s. There is an unidentified triangular mark on the outer band. The ring tests strongly for silver, and is probably European. It is sized a 6 1/4. Gross weight: 4.7 grams

Rectangular, curved panels with raised decoration of stylized berry-like, long-stemmed flowers and leaves, on a textured background. The screw backs are attached with thick solder, and are marked sterling. Each earring measures approximately 5/8 inch by 3/8 inch. Weight: 4.9 grams total

An irregular shaped piece of amber is mounted in a handmade bezel. The mounting is decorated with hand-applied silver biomorphic protrusions. The bailbears the Krakow mark for .916 silver, with an additional mark indicating added metal, although all of the metal tests as silver. The pendant measures 2 ½ inches long, including the bail and jump ring, and 1 3/8 inches wide.