Onion-shaped vessel with finely impressed ribs on the rounded exterior of the body.
The flat shoulder topped by a narrow neck with flared bell mouth. The thin handle curves from neck to shoulder.
The vessel is covered with an attractive jet black glaze that creates a brilliant reflection in any light.
Reserved just above and underneath the base.
For comparable examples, cf. Beazley Archive database nos...

Interesting stamp seal in a greenish black stone, Anatolia, Neo Hittite states of the late 2nd.-early 1st. millenium BC.

The seal with high pierced handle and oval base, engraved with what appears to be scriptsigns, perhaps Luwian, we're not experts in these.

Size: 22 mm tall and quite massive...

Interesting and massive bronze ring with standing human on the Bezel, Amlash / South Caspian Sea area, c. early 2nd. millenium BC.

An unsually large ring for it's type. Normally these are decorated with applied patterns on a spiral - in this case the ringmaker also found space for a standing human figure with a weapon or a staff in his left hand, likely a mythical figure or a warrior. Lovely red and blue-green patina!

Size: The round bezel measure 27 mm...

A nice larger terracotta fertility figure of female form, Bajaur (Indus Valley), c. 3000-2500 BC.

A hollow mould-made Indus Valley red terracotta statuette modelled in a stylised manner with applied facial features of birdlike form. Also with applied arms and beasts on the cone-shaped body.

Size: 14,5 cm. tall and 8 cm...

An unusually large and choice terracotta fertility figure of female form, Bajaur (Indus Valley), c. 3000-2500 BC.

A hollow mould-made Indus Valley red terracotta statuette modelled in a stylised manner with applied facial features of birdlike form. Also with applied arms and beasts on the cone-shaped body.

Size: 20,7 cm. tall and 8,3 cm...

An unusually large and choice terracotta fertility figure of female form, Bajaur (Indus Valley), c. 3000-2500 BC.

A hollow mould-made Indus Valley red terracotta statuette modelled in a stylised manner with applied facial features of birdlike form. Also with applied arms and beasts on the cone-shaped body.

Size: 21 cm. tall and 8 cm...

Rare ancient Romano-Celtic solid silver zoomorphic fibula brooch, finely hand-shaped as a wild boar. Roman Empire 1st-2nd century AD.

The fibula is not cast like most Roman and Celtic fibulas but is entirely handmade. The board and the base are hand-cut from solid silver plaque, hand-sculptured, and then chiseled with fine details.

Also, the attachment pin is entirely handmade.

In Celtic mythology, the wild boar represents the Celtic God "Moccus," who is identified with Mercury...

Ancient palstave axe, originating from Europe. The axe dates back to 1400-1200 B.C., making it an ancient relic of historical value. It is made of cast and polished bronze and has a typical form. The massive axe head features a dramatic flared vertical blade, a thick blade neck with a recessed triangular design, two lateral hafting flanges, and a thin stop bar.

The skilled craftsmanship showcased in the axe is a testament to the advanced metallurgical techniques of early civilizations...

Very rare, museum-quality, ancient Canaanite short sword-dagger that originated from the Holy Land during the early Bronze Age IV (2300-2000 BC). It was made during the time of the biblical patriarch Abraham and is cast and hammered from bronze. The sword has a double-edged tapered blade with a bulged cardinal nerve and slanted shoulders. Additionally, the heart-shaped tang is pierced with eight rivet holes, which were used to attach handles made of a different material...

Ancient Hittite 2000 B.C...

Ancient 5th -3rd century B.C. Scytho - Siberian (Siberian Scythian) solid silver belt plaque in the shape of a crouched feline perhaps a leopard fitted at the reverse with two loops for attachment. The two attachment loops are made of silver strips soldered to the rear of the plaque. The plaque is cast, then hand reshaped in repousse, pierced, and chased.

MEASUREMENTS: Overall length in a straight line:7.5cm (2.95 inches). Width: 3.1 cm (1.22 inches). Weight: 28 grams.

Provenance...

Authentic, ancient, cast bronze Etruscan hand mirror. It dates back to Etruria (Italy) around 350-200 BC and is in a typical Etruscan form with a tapered stem handle. It is shaped like a circular disc with a slight concave on the reverse and has a pronounced two-stage lip engraved in concentric circles. The lip is also incised with a continuous groove around the rim and adorned with an engraved lobed rosette in the form of a flower head.

This mirror is a rare example of a children's mirro...

This is an exceptional piece of history - a museum-quality bronze axe head from the Luristan region, dating back to the period of 1250-900 BC. The axe head boasts a unique design, featuring a flaring and downward-curved blade accentuated by central and side reliefs. The cylindrical ribbed shaft enhances its aesthetics, and four conical spikes ensure stability. This artifact offers a glimpse into the ancient world and the remarkable craftsmanship of that era.

MEASUREMENTS:

Overall len...

This exquisite artifact is an ancient North-Western Asiatic short bronze sword or dagger that dates back to a period between 1200 and 800 B.C. The craftsmanship is truly impressive, as the sword has been cast using the lost wax process to create a perfectly formed solid bronze hilt of oval shape. The hilt is adorned with double rings that give it a unique and elegant appearance. The elliptical pommel extends to the bronze bolsters in the form of animal heads, adding character and charm to the sw...

An important Germanic Visigothic belt buckle from the Migration Period, 6th century AD, Kingdom of the Visigoth, Iberian Peninsula.

The buckle plate is rectangular and has been made using the Cloisonne technique.

The front surface of the buckle is adorned with lozenge-shaped natural lapis lazuli stone set in a solid gold setting. It is surrounded by green and cobalt blue glass and copper alloy straps.

The rectangular plate has been connected to a thick oval loop by two hinge...

This remarkable artifact is a bronze sword that dates back to the 14th and 10th century B.C. It was discovered in the North-Western Asiatic-Caspian Sea area and features a finely cast tapering double-edged blade with a median ridge. At the ricasso, there is a raised penannular panel that adds a unique touch to the sword's design. The grip is integral, with flanges to the edges that make it easy to hold, and each face is hollowed to insert a pair of grip scales. Originally, the handle would have ...

Ancient Egyptian or Canaanite bronze 'Duckbill' axe-head, Middle Kingdom–Early New Kingdom 2100– 1500 B.C.

Sturdy cast in two halves with a triangular blade, a medial ridge flanked with two oblong openings, and a small round eye for inserting a wooden socket.

Such duckbill axes were mainly produced in Egypt and Syria-Palestine during Phase IIA of the Middle Bronze Age, roughly contemporaneous with the 12th Dynasty in Egypt.

At that time, these territories were under the rule of...

This exquisite ancient artifact is a bronze sword from the North-Western Asiatic "Amlash" region, which dates back to the 10th-8th century B.C. The sword was discovered in the vicinity of the Caspian Sea area and is a rare find. The intricate design of the hilt is formed of two segments, with the grip featuring a square section. The disk pommel is extended to a conical molding, making it visually striking. The penannular guard is elliptical in shape and holds a double-edged tapering blade with a...