Chinese carved wood round cover or top for Tea Jar or Tea Caddy, 1 5/8" diameter 7/8" high (inside), your tea caddy top must be smaller than wooden top inside measurement in order to cover over the top. The condition is good. Three(3) more tops are available, please inquire.

Chinese Hardwood round solid tiny Display Stand, 7/8" diameter-inside top rim, 3/4" high, 1 7/8" wide-middle wider area, no damages, several extra stands are available, please inquire.

Offered is a vintage orange-colored knit tunic such as would be worn by Star Trek series star William Shatner, along with a hand signed photo of him. Acquired in New England, I had investigated the possibility of this being a show-worn artifact, which would have been worth perhaps $10,000 in the open market for entertainment memorabilia...

ROLEX 18k Yellow Gold Plate Logo Buckle marked: PLAIN FLAT SWISS 18mm Logo Buckle offered in the marked current Factory Wrap: "SWISS GLASS/ PLAIN FLAT SWISS". Hand stamped by Hammer & Striking or Imprint Tool: "ACIERINOX ROLEXSA SWISS". The Extra large Crown was hand pressed by a dye and welded to the buckle; then hand polished. This buckle features an traditional and original (1/3 larger) extra large Logo Crown similar only to the first Rolex buckle produced in the late 1950s...

Chinese Hardwood large Lamp top, 5 7/8" diameter-outside maximum measurement, the condition is good. More available, please inquire.

Chinese carved Hardwood tiny round display Stand, 1" high, 7/8" diameter-inside top rim, 2" to 1 7/8" wide at the carved middle section, no damages, several extra stand are available, please inquire.

Pair "Hong Kong" made Hardwood Square Display Stands, 5" square, 1" high, supported by small curved feet, the condition is good.

Chinese carved large Hardwood polished Brown color Display Stand, heavy weight, made out of one piece of wood and supported by four(4) small feet attached to the stand with wooden peg, 2 1/4" high, 13 1/2" diameter-outside maximum diameter, 11 1/2" diameter-inside the rim. "Made in China" label on the bottom. One(1) more stand is available, that will make pair. The condition is good.

Chinese Hardwood Display Stand, or Lamp base, square bottom round top, 3 7/8" diameter-inside top rim, 5"-across minimum width, 6 1/2" maximum width point to point, 1 1/4" high, I have three(3) more stands, please inquire. The condition is good.

Japanese Bamboo Ikebana flower Arrangement Hanger, 27" long, 3" wide-bottom, in good condition.

Novelty Metal Bottle Top Opener and Cork Screw. the Cork screw pulls out from the body.

The size of Washi Canister : 6" High x 3" Dia.
This is rare Japanese Washi wrapped tin Tea Canister. It is about 50 - 60 years old. The design of Washi (Japanese paper) has very intricately designed and printed by woodblock or silkscreen printing method, but not offset lithograph. It has printed with several colors. Inside canister with jade color synthetic made knob. The cover and main body match the design perfectly...

Pair Chinese Hardwood shaped Display Stands, 3 3/4" x 1 3/4" wide,3/4" high, supported by 4 small feet, the condition is good.

Two(2) Chinese carved Hardwood Display Stands, black stained, 4 5/8" diameter inside top rim, 1 3/8" high, the condition is good.

Offered for your consideration is a wonderful group of 4 Burroughs & Wellcome pill tiles featuring a different scene or theme on each tile. The attractive pill tiles measure 6" square and are in unused, boxed condition. Some staining and wear to the paper label as seen in the photos.

These handmade tiles originate from Delft, Holland, and are part of a limited edition commissioned by the Burroughs & Wellcome Co...

"Hong Kong" made Hardwood Square shape Display Stand, 4 3/4" square, 1 1/2" high, supported by 4 small curved feet, the condition is good.

This is a whimsical piece by one of the most important potters in the 20thcentury who hailed from Seto, Suzuki Seisei 鈴木青々(1914-1990)...

Unusual item and hard to date, it is a small board to hang up that you can pin notes etc.. on Measure circa 12" Tall