Antique Japanese iron tsuba or hand guard for a sword, in a mokko or melon shape, decorated with motifs of thin tree branches with plums and blossoms, with silver and Shokudo inlay, and an engraved sun in the top corner. The backside has a small cluster of plums inlaid with silver. Size: 3" height, 2.75" width

Circular jingasa with a gradual domed top; Textured to simulate leather. The composition is of bamboo, paper, and many layers of Urishi lacquer work. The interior is finished in red with its original cotton gear straps and cushion. Excellent condition. With the mitsudome "God of War" mon...

Antique Japanese bronze Shakudo (mixture of Gold and Copper) menuki of a fu dog with signature engraved on its backside. Menuki are one of many components to a Japanese sword, mounted as an ornament on the tsuka (handle). They are believed by some to secure the swordsman's grip. Size: 1 1/4" Long x .5" wide

Antique Japanese iron tsuba, or hand guard for a sword. It has an oval shape with raised motif of gold inlay bamboo shoots and leaves crossing in from the outer edges. Its backside has a single bunch of gold inlay leaves peeking in from the bottom. Size: 2.75" height, 2.5" width

The netsuke is made in the shape of a matchlock pistol. It is composed of different material such as wood, brass, and iron. Handmade during the Meiji period for the European market. Mounted on a custom iron stand.

Meiji Period 19th Century

Size: 5" L x 1.5" W x 1.5" H
(4.25" H on stand)

Small bronze flared muzzle cannon of this type where made for shooting flaming arrows at ships. For launching fireworks at festivals and for signaling purposes. The example of cast bronze with a bore that is described as at the breach and the bore is reduced to a half round section to form a chamber for the powder mount for use.
The gun would be imbedded into a wooded block such as the lower half of the barrel and the entire breach end is covered...

The tatami armor was used by foot soldiers, archers, and spearmen. Its a lightweight armor which allowed the warriors to be more swift and fluid with their movements. It is also an economical munition armor as a alternative to the traditional lace scale construction. Going to battle was costly and this gave the clan army full protection from all levels of warfare.
The armors head gear covering has two flaps with a back slit...

Antique Japanese menuki of a snarling fu dog's head over gilt flowing "fabric", made with gold ,silver, shakudo,copper and bronze.. Menuki are one of many components to a Japanese sword, mounted as an ornament on the tsuka (handle). They are believed by some to secure the swordsman's grip. Size: 1.75" long, .5" wide

The bronze cast cannon is decorated in low relief of a coiled dragon. The shape handle stock and body represent a carp. The signaling cannons shows a smooth casting which indicates it was lost cast from wax. Fine detailing shows high level of craftsmanship. Mounted on custom Bronze stand.

Meiji Period 19th Century

Size: 4" L x 1.25" W x 1.5" H (4.5" H on stand)

Antique Japanese jingasa (samurai war hat). Carved of wood and lacquered black with many raised plates and upturned rim. This shape of bajo-jingasa was developed to be worn by warriors on horseback. The underside is lacquered black and his metal eyelets intended for cord. Age Edo Age - 19th century

Dimensions: 6 1/2" high x 16 1/4" long x 12 3/8" wide

This is a very fine Japanese Netsuke hand-carved during the Meiji Period of Japan by Ruygetsu. It depicts a Sumo Wrestler, who is wearing the typical Mawashi with a heavy twisted rope, which is bound in the back in the typical ‘unryu’ knot. Intricate and true to form detail have been carved in this remarkable miniature sculpture...

This is an very fine Japanese Netsuke hand-carved during the Meiji Period of Japan by Ruygetsu. It depicts a Peasant holding a basket with fruits and vegetables, while pleasurably (notice his smile) smoking a pipe. Intricate and true to form detail have been carved in this remarkable miniature sculpture. The artist has accented the figure with different shades of brown stain...

Two stacks of each 5 flat boxes or trays for storing kozuka, fuchi-kashira or other small and flat objects, the tops both covered with a lid. Both stacks stand on a rectangular bottom plate, tied with a braided silk rope. Shitan (sandal wood). Meiji period, around 1900.
Bottom plate: 9 7/8 x 8 5/8 in. (25 x 21.8 cm). Each tray 8 3/8 x 4 ¾ x 1 1/16 in...

Japanese antique 15 ken (plates) jingasa hat for a ashigaru foot soldier. Made of iron with large rivets and edged with oxidized silver. Comes with a custom metal stand. The samurai class in feudal Japan, as well as their retainers and footsoldiers (ashigaru), used several types of jingasa made from iron, copper, wood, paper, bamboo, or leather.

Age: Edo Period (1603-1867)

Dimensions: 23" high (including stand) x 15 1/4" wide

A kozuka with sea shell and seaweed decoration with gold and silver overlaid on shakudo (a pickled gold and copper alloy) nanako ('fish roe' textured ground.) The utility knife handle with filed gilt bronze sides and back. Slight bend and the nanako somewhat dented in places. Would present nicely enough with a sword fitted to hold a kozuka in the saya (scabbard.) Kogatana (utility blade) not included. Length, 3 3/4 inches.

Certainly Choki the devil hunter emptying his sack, it is funny to see the three devils captured and emptied from the sack depicted on the inner side of the kozuka, so the artist has cleverly increased his reading page using the reverse side as well.Many goldsmith techniques used. Partly golden...

An excellent shakudo tsuba inlaid with a "thousand flowers" decoration in gold, silver and sentoku. The technique is particular, the tsuba is first cast in shakudo with all the flowers in relief, then chiseled. Then each flower is covered with a thick sheet of metal, gold, silver or sentoku, this sheet is hammered on the sides of the flowers as one would border a bed sheet. Excellent work , exceedingly difficult more than inlaid...

Antique Japanese jingasa (samurai hat) with Ōgi (folding fan) crest. Covered in black lacquer with the mon in gold. The underside is lacquered red and still has remnants of the original silk padding. With a custom metal stand.
The samurai class in feudal Japan, as well as their retainers and footsoldiers (ashigaru), used several types of jingasa made from iron, copper, wood, paper, bamboo, or leather...